Fourteen & Sixteen Inch Custom Assemblies
Fourteen Inch Drop Base Air Filters - Chrome
Race ready low profile air cleaner. Drops filter 7/8" or 1-1/4" below carburetor flange. 5-1/8" flange fits all popular 4 barrel carburetors. Four element heights to fit a wide variety of applications. Note: 7/8" drop will fit carburetors with electric choke mechanisms.
1-1/4" DROP BASE
| Neck Flange |
Element Height |
K&N P/N Element |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 5-1/8" | 3" | E-1650 | 2 | 60-1280* | 2.75" |
| 5-1/8" | 4" | E-3750 | 2 | 60-1290* | 3.75" |
| 5-1/8" | 5" | E-3760 | 2 | 60-1300* | 4.75" |
| 5-1/8" | 6" | E-3770 | 2 | 60-1310* | 5.75" |
7/8" DROP BASE
| Neck Flange |
Element Height |
K&N P/N Element |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 5-1/8" | 3" | E-1650 | 2 | 60-1430 | 3.12" |
| 5-1/8" | 4" | E-3750 | 2 | 60-1440 | 4.12" |
| 5-1/8" | 5" | E-3760 | 2 | 60-1450 | 5.12" |
| 5-1/8" | 6" | E-3770 | 2 | 60-1460 | 6.12" |
Fourteen Inch Air Filters - Chrome
Popular 14" chrome racing style assembly. Raises element 9/16" above carburetor flange. 5-1/8" flange fits all popular 4 barrel carburetors. Four element heights to fit a wide variety of applications. Will clear HEI distributors.
| Neck Flange |
Element Height |
K&N P/N Element |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 5-1/8" | 2-5/16" | E-3740 | 1 | 60-1263 | 3.87" |
| 5-1/8" | 3" | E-1650 | 1 | 60-1264 | 4.62" |
| 5-1/8" | 4" | E-3750 | 1 | 60-1260 | 5.62" |
| 5-1/8" | 5" | E-3760 | 1 | 60-1270 | 6.62" |
14 & 16 Inch Dominator Air Filters - Chrome
14" DOMINATOR AIR FILTER
K&N's 14" diameter race-ready air cleaners can flow the amount of air required for the Holley Dominator carburetors. 7-5/16" flange base has a 3/4" rise velocity stack.
| Neck Flange |
Element Height |
K&N P/N Element |
Filter OD |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 7-5/16" | 4" | E-3750 | 14" | 5 | 60-1235 | 5.50" |
| 7-5/16" | 5" | E-3760 | 14" | 5 | 60-1245 | 6.50" |
| 7-5/16" | 6" | E-3770 | 14" | 5 | 60-1255 | 7.50" |
16" DOMINATOR AIR FILTER
This 16 inch Dominator Assembly flows up to 1,150 CFM (cubic feet per minute)
| Neck Flange |
Element Height |
K&N P/N Element |
Filter OD |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 7 5/16" | 3 1/2" | E-3804 | 16" | 7 | 60-1640 | 3.25" |
| 7 5/16" | 4 1/16" | E-3806 | 16" | 7 | 60-1641 | 3.813" |
| 7 5/16" | 4 1/2" | E-3808 | 16" | 7 | 60-1642 | 4.25" |
Fourteen Inch Triangle Air Filter - Chrome
K&N's new custom chrome triangle assembly is designed to make any engine compartment come to life. This triangle assembly comes with a 3" high K&N Filtercharger®, has smooth radius corners and fits most carburetors with 5-1/8" flange.
| Neck Flange |
Element Height |
K&N P/N Element |
Filter OD |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 5-1/8" | 3" | E-3737 | 14" | - | 60-1470 | 3.62" |
Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.
FOOTNOTES 1) Includes vent kit 2) Vent kit available, P/N 85-1190 3) 1/2" vent tube on base 4) 3/4" vent tube on base 5) Top is chrome & base is hi-temp nylon 6) Stainless Steel top & chrome base. 7) Base and top are chrome plated. * Will not fit Edelbrock carbs with electric choke. ** Total Height = minimum clearance required above carburetor flange.
