K&N Seven Inch Air Filters Chrome
Ideal for that quality show car image. Four flange sizes to fit nearly all carburetors, even 5-1/8" flange 4 barrels.
Note: These assemblies might not flow enough air for performance engines. See the Air Filter Facts section for proper sizing.
| Neck Flange |
Element Height |
K&N P/N Element |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 2-5/16" | 2" | E-3360 | 1 | 60-1010 | 3.06" |
| 2-5/16" | 3" | E-3380 | 1 | 60-1020 | 4.06" |
| 2-5/8" | 3" | E-3380 | 1 | 60-1040 | 4.12" |
| 3-1/16" | 2" | E-3360 | 1 | 60-1050 | 3.12" |
| 5-1/8" | 2" | E-3402 | N/A | 60-1320 | 2.93" |
| 5-1/8" | 3" | E-3403 | N/A | 60-1330 | 3.93" |
Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.
FOOTNOTES 1) 1/2" vent tube on base
