K&N Nine Inch Air Filters
K&N Nine Inch Chrome Air Filters
Ideal when space is a problem. K&N Filtercharger® element provides superior airflow. Five flange sizes and various heights assure a wide number of applications. Polished stainless steel construction for top and base plates. Can be mounted on most dual carb setups.
| Neck Flange |
Element Height |
K&N P/N Element |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 2-5/8" | 2" | E-3527 | 4 | 60-1070 | 3.37" |
| 2-5/8" | 2-7/8" | E-3530 | 4 | 60-1080 | 4.12" |
| 3-1/16" | 2-7/8" | E-3530 | 4 | 60-1090 | 4.12" |
| 4-7/32" | 2-7/8" | E-3530 | 4 | 60-1100 | 4.12" |
| 5-1/8" | 2" | E-3527 | 4 | 60-1110 | 3.37" |
| 5-1/8" | 2-7/8" | E-3530 | 4 | 60-1120 | 4.12" |
| 5-1/8" | 5" | E-3650 | 4 | 60-1365 | 6.37" |
| 7-5/16" | 2-7/8" | E-3530 | - | 60-1370 | 4.12" |
| 7-5/16" | 5" | E-3650 | - | 60-1366 | 6.37" |
Nine Inch Tall Velocity Stack Air Filters - Stainless Steel
Open 360° free breathing 9" Filtercharger® element on top of a 5" high stainless steel velocity stack base. Draws cooler air up and away from engine heat. Engines equipped with the K&N Tall Velocity Stack Air Filter can actually produce MORE horsepower than those with no filtration at all. All stainless steel top and base, highly polished to a mirror finish. Available with 5-1/8" flange to fit Holley, Carter or Rochester carburetors. Choice of two element heights assures proper airflow for virtually any engine. Also available with 7-5/16" flange to fit Holley Dominator carburetors. Note: These K&N assemblies are not U.S. Coast Guard approved for use as a flame arrestor.
| Neck Flange |
Element Height |
K&N P/N Element |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 5-1/8" | 2-7/8" | E-3530 | - | 58-1190 | 8.25" |
| 5-1/8" | 5" | E-3650 | - | 58-1191 | 10.50" |
| 7-5/16" | 2-7/8" | E-3530 | - | 58-1200 | 8.25" |
| 7-5/16" | 5" | E-3650 | - | 58-1210 | 10.50" |
Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.
FOOTNOTES 1) Includes vent kit 2) Vent kit available, P/N 85-1190 3) 1/2" vent tube on base 4) 3/4" vent tube on base 5) Top is chrome & base is hi-temp nylon 6) Stainless Steel top & chrome base. * Will not fit Edelbrock carbs with electric choke. ** Total Height = minimum clearance required above carburetor flange.
